ENERZONE HARMONY 2.3 LARGE WOOD STOVE

C$3,699.00

Holder of an industrial design protection, the Harmony leaves no one indifferent with its look reminiscent of cast iron appliances, while offering the many advantages of wood stoves made of steel. The detail of the unique Fluted Roman Doric columns provides great elegance. Meeting EPA requirements with emissions below 2.3 g/h, the Harmony is an eco-friendly appliance that complies with the most stringent North American Standard.

Available with a refined black or silver door trim, this unit becomes a serious choice to consider. Installation in a mobile home is allowed and you can add an air supply to the combustion to meet the requirements of domestic energy sources. Its 2.3 cubic feet combustion chamber makes the Harmony a generous source of heat for your home that will certainly meet your highest expectations.

Custom Order

Pay a 30% deposit per item
SKU: EB00045 Categories: ,

Description

APPLIANCE PERFORMANCE (1)

Fuel type :Dry cordwood (16″ recommended)
Recommended heating area-ft² : ()500 – 2,100
Overall firebox volume-ft³ :2.4
Maximum burn time : ()8 h
Maximum heat output-dry cordwood : (2)75,000 BTU/h (22.0 kW)
Overall heat output rate < : (2) (3)14,200 BTU/h (4.16 kW) to 44,500 BTU/h (13.04 kW)
Average overall efficiency (dry cordwood) : (3)72 % (HHV) (4)77 % (LHV) (5)
Optimum overall efficiency : (6) (7)79 %
Optimum heat transfer efficiency : (8)76 %
Average particulate emissions rate : (9)2.3 g/h
Average CO : (10)69 g/h

(1) Values are as measured per test method, except for the recommended heating area, firebox volume, maximum burn time and maximum heat output.

(2) The maximum heat output (dry cordwood) is based on a loading density varying between 15 lb/ft³ and 20 lb/ft³ and reloading intervals ranging from 60 to 120 minutes. Other performances are based on a fuel load prescribed by the standard without any reloading between start and finish. The specified loading density varies between 7 lb/ft³ and 12 lb/ft³. The moisture content is between 19% and 25%.

(3) As measured per CSA B415.1-10 stack loss method.

(4) Higher Heating Value of the fuel.

(5) Lower Heating Value of the fuel.

(6) Performances based on a fuel load prescribed by the standard at 7 lb/ft³ and with a moisture content between 19% and 25%.

(7) Optimum overall efficiency at a specific burn rate (LHV).

(8) The optimum heat transfer efficiency is for the low burn rate (using HHV) and represents the appliance’s ability to convert the energy contained in the wood logs into energy transferred to the room in the form of heat and does not take into account the chemical losses during combustion.

(9) This appliance is officially tested and certified by an independent agency.

(10) Carbon monoxyde.

GENERAL FEATURES

Combustion technologyNon-catalytic
EPA loading volume-ft³1.95
High-efficiency certified applianceYes, EPA 2020 approved
Maximum log length20″
Log positioningLoading over width
Chimney diameter6″
Flue outlet diameter6″
Type of chimneyCAN/ULC S629, UL 103 HT (2100 °F)
Minimum chimney height (feet)12′
Baffle typeC-Cast or equivalent
Approved for an alcove installationYes
Approved for a mobile home installationYes, with fresh air intake
Shipping Weight435 lb (198 kg)
Door typeSingle, glass with cast iron frame
Glass typeCeramic glass
Glass surface – dimensions (Width X Height)16 1/2″ X 10 1/8″
Glass air-wash systemYes
Overall dimension (Height)30 1/8″
Overall dimension (Width)25 5/8″
Overall dimension (Depth)25 5/8″
Door opening – dimension (Height)9″
Door opening – dimension (Width)17 1/2″
Firebox – dimension (Height)11 7/8″
Firebox – dimension (Width)21″
Firebox – dimension (Depth)17 1/4″
Firebox lined with refractory bricks for better heat distributionYes
Stainless-steel secondary-air system improving gas combustionYes
ModelLegs
Steel thickness – body3/16″
Steel thickness – top3/8″
Easy-to-access ash drawerYes
USA standard (emissions)Comply with EPA 2020
Canadian Standard (emissions)CSA B415.1-10
USA standard (safety)UL 1482, UL 737
Canadian standard (safety)ULC S627
Tested and listed as per applicable standardsBy an accredited laboratory (CAN/USA)
WarrantyLimited lifetime
Minimum clearances to combustibles*
(Data expressed in inches. 1 inch = 25.4 mm)
CanadaUnited-States
Single wall pipeDouble wall pipeSingle wall pipeDouble wall pipe
Clearance – back wall14 1/2″6″11″6″
Clearance – corner12″12″12″12″
Clearance – side wall22″22″22″22″
Clearance – top (measured from the platform on which the appliance is installed)**84″84″84″84″

* The information given on the certification label affixed to the appliance always overrides the information published in any other media (owner’s manual, catalogues, flyers, magazines and/or web sites).

** Some appliances have been tested with a low ceiling. Before setting up your unit, refer to the installation manual.

Additional information

Weight435 lbs
Dimensions30 × 26 × 26 in