ENERZONE SOLUTION 1.4 SMALL WOOD STOVE

C$1,999.00

SPECIAL ORDER ITEM (Price Does Not Include Freight)

SOLUTION 1.4 WOOD STOVE
Enjoy cold days with the unmatched warmth offered by the
Solution 1.4 wood stove. Smallest model in the series, its
reduced size makes it a versatile appliance with a charming
look. Functional and practical, it has a north-south firebox,
to load logs over depth, and a sturdy ash lip. The Solution
1.4 is also equipped with side panels with delicate engraved
grooves, an arched cast iron door and steel legs. Invite
tranquility, comfort, and simplicity in your home.
• Recommended heating area: 250 to 1,200 sq. ft.
• Maximum heat output (dry cordwood): 45,000 BTU/h
• Combustion technology: Non-catalytic
• Smallest model in the series

Custom Order

Pay a 30% deposit per item

Description

APPLIANCE PERFORMANCE (1)

Fuel type :Dry cordwood (16″ recommended)
Recommended heating area-ft² : ()250 – 1,200
Overall firebox volume-ft³ :1.8
EPA loading volume-ft³ :1.55
Maximum heat output-dry cordwood : (2)45,000 BTU/h (13.19 kW)
Overall heat output rate < : (2) (3)12,124 BTU/h (3.55 kW) to 26,700 BTU/h (7.83 kW)
Average overall efficiency (dry cordwood) : (3)74 % (HHV) (4)79 % (LHV) (5)
Optimum efficiency : (6) (7)80 %
Optimum heat transfer efficiency : (8)79 %
Average particulate emissions rate : (9)1.8 g/h
Average CO : (10)74 g/h

(1) Values are as measured per test method, except for the recommended heating area, firebox volume, maximum burn time and maximum heat output.

(2) The maximum heat output (dry cordwood) is based on a loading density varying between 15 lb/ft³ and 20 lb/ft³ and reloading intervals ranging from 60 to 120 minutes. Other performances are based on a fuel load prescribed by the standard without any reloading between start and finish. The specified loading density varies between 7 lb/ft³ and 12 lb/ft³. The moisture content is between 19% and 25%.

(3) As measured per CSA B415.1-10 stack loss method.

(4) Higher Heating Value of the fuel.

(5) Lower Heating Value of the fuel.

(6) Performances based on a fuel load prescribed by the standard at 7 lb/ft³ and with a moisture content between 19% and 25%.

(7) Optimum overall efficiency at a specific burn rate (LHV).

(8) The optimum heat transfer efficiency is for the low burn rate (using HHV) and represents the appliance’s ability to convert the energy contained in the wood logs into energy transferred to the room in the form of heat and does not take into account the chemical losses during combustion.

(9) This appliance is officially tested and certified by an independent agency.

(10) Carbon monoxide.

GENERAL FEATURES

Combustion technologyNon-catalytic
Maximum burn time5 h
High-efficiency certified applianceYes, EPA 2020 approved
Maximum log length17″
Log positioningLoading over depth
Chimney diameter6″
Flue outlet diameter6″
Type of chimneyCAN/ULC S629, UL 103 HT (2100 °F)
Minimum chimney height (feet)12′
Baffle typeC-Cast or equivalent
Approved for an alcove installationYes
Approved for a mobile home installationYes, with fresh air intake
Shipping Weight325 lb (147 kg)
Door typeSingle, glass with cast iron frame
Glass typeCeramic glass
Glass surface – dimensions (Width X Height)10 1/4″ x 8 7/8″
Glass air-wash systemYes
Overall dimension (Height)28 7/8”
Overall dimension (Width)20”
Overall dimension (Depth)27 7/8”
Door opening – dimension (Height)7 5/8″
Door opening – dimension (Width)12″
Firebox – dimension (Height)11 3/4″
Firebox – dimension (Width)14 1/4″
Firebox – dimension (Depth)19 1/8″
Firebox lined with refractory bricks for better heat distributionYes
Stainless-steel secondary-air system improving gas combustionYes
Steel thickness – body3/16″
Steel thickness – top5/16″
USA standard (emissions)EPA
Canadian Standard (emissions)CSA B415.1-10
USA standard (safety)UL 1482, UL 737
Canadian standard (safety)ULC S627
Tested and listed as per applicable standardsBy an accredited laboratory (CAN/USA)
WarrantyLimited lifetime

Additional information

Weight325 lbs
Dimensions29 × 20 × 28 in