ENERZONE SOLUTION 3.3 LARGE WOOD STOVE LEGS AND ASH DRAWER

C$3,749.00

 BLACK CAST IRON TRADITIONAL LEGS WITH ASH DRAWER  AC01251

SPECIAL ORDER ITEM (Price Does Not Include Freight)

Once again, Enerzone designs and manufactures a superior quality heater to provide you with the independence and security you and your family are looking for. This brand new large ecological model will be soothing to the soul, especially in times of power failure, during cold seasons.

The Solution 3.3 is equipped with side panels fitted with delicate engraved grooves and an arched cast iron door which beautifully highlights the flames. Choose from our pedestal or three leg models, black or brushed nickel, traditional, round or straight. You can also upgrade your appliance with a blower with thermodisc and a rigid firescreen for more comfort.

Custom Order

Pay a 30% deposit per item

Description

APPLIANCE PERFORMANCE (1)

Fuel type :Dry cordwood (16″ recommended)
Recommended heating area-ft² : ()900 – 2,300
Overall firebox volume-ft³ :3.3
EPA loading volume-ft³ :2.67
Maximum heat output-dry cordwood : (2)90,000 BTU/h (26.4 kW)
Overall heat output rate < : (2) (3)15,841 BTU/h (4.64 kW) to 57,041 BTU/h (16.72 kW)
Average overall efficiency (dry cordwood) : (3)71.1% (HHV) (4)76.6% (LHV) (5)
Optimum overall efficiency : (6) (7)78%
Optimum heat transfer efficiency : (8)74%
Average particulate emissions rate : (9)0.95 g/h
Average CO : (10)61.3 g/h

(1) Values are as measured per test method, except for the recommended heating area, firebox volume, maximum burn time and maximum heat output.

(2) The maximum heat output (dry cordwood) is based on a loading density varying between 15 lb/ft³ and 20 lb/ft³ and reloading intervals ranging from 60 to 120 minutes. Other performances are based on a fuel load prescribed by the standard without any reloading between start and finish. The specified loading density varies between 7 lb/ft³ and 12 lb/ft³. The moisture content is between 19% and 25%.

(3) As measured per CSA B415.1-10 stack loss method.

(4) Higher Heating Value of the fuel.

(5) Lower Heating Value of the fuel.

(6) Performances based on a fuel load prescribed by the standard at 7 lb/ft³ and with a moisture content between 19% and 25%.

(7) Optimum overall efficiency at a specific burn rate (LHV).

(8) The optimum heat transfer efficiency is for the low burn rate (using HHV) and represents the appliance’s ability to convert the energy contained in the wood logs into energy transferred to the room in the form of heat and does not take into account the chemical losses during combustion.

(9) This appliance is officially tested and certified by an independent agency.

(10) Carbon monoxyde.

GENERAL FEATURES

Combustion technologyNon-catalytic
Maximum burn time10 h
High-efficiency certified applianceYes, EPA 2020 approved
Maximum log length20″
Log positioningLoading over depth
Chimney diameter6″
Flue outlet diameter6″
Type of chimneyCAN/ULC S629, UL 103 HT (2100 °F)
Minimum chimney height (feet)15′
Baffle typeC-Cast or equivalent
Approved for a mobile home installationYes, with fresh air intake
Shipping Weight472 lb (214 kg)
Door typeSingle, glass with cast iron frame
Glass typeCeramic glass
Glass surface – dimensions (Width X Height)14 5/8″ X 11 3/4″
Glass air-wash systemYes
Overall dimension (Height)33 3/8″
Overall dimension (Width)24 1/4″
Overall dimension (Depth)30 7/8″
Door opening – dimension (Height)12″
Door opening – dimension (Width)16″
Firebox – dimension (Height)14 1/8″
Firebox – dimension (Width)19″
Firebox – dimension (Depth)21″
Firebox lined with refractory bricks for better heat distributionYes
Stainless-steel secondary-air system improving gas combustionYes
Steel thickness – body3/16″
Steel thickness – top3/8″
USA standard (emissions)EPA
Canadian Standard (emissions)CSA B415.1-10
USA standard (safety)UL 1482, UL 737
Canadian standard (safety)ULC S627
Tested and listed as per applicable standardsBy an accredited laboratory (CAN/USA)
WarrantyLimited lifetime
Minimum clearances to combustibles*
(Data expressed in inches. 1 inch = 25.4 mm)
CanadaUnited-States
Single wall pipeDouble wall pipeSingle wall pipeDouble wall pipe
Clearance – back wall14 1/2″7 1/2″14 1/2″7 1/2″
Clearance – corner10″8″10″8″
Clearance – side wall12″12″12″12″
Clearance – top (measured from the platform on which the appliance is installed)**84″84″84″84″

* The information given on the certification label affixed to the appliance always overrides the information published in any other media (owner’s manual, catalogues, flyers, magazines and/or web sites).

** Some appliances have been tested with a low ceiling. Before setting up your unit, refer to the installation manual.

Additional information

Weight472 lbs
Dimensions33 × 24 × 31 in